Lartington Hall | FuranFlex Case Studies

Lartington Hall

This project was undertaken by Kompozit’all UK installation partner “specialist Chimney services”.

The existing marble fireplace needed to be made operational as the owner wanted to use this for events and functions at the hall. Which meant that the large diameter of flue liner needed to be replaced.

It was decided that Furanflex25 was going to the most cost effective and practical solution in maintaining the flue diameter within the chimney stack due to FuranFlex25 liners being so thin. Large marble fireplace in reception room with a chimney length of 12 metres tapering towards the top. The chimney measured 275mm square through to the chimney stack. This was one of eight chimneys which Specialist Chimney Services was asked to survey and quote for relining.

The existing chimney had a flexible 175mm flue liner installed to loft height and from this point to the top of the stack twin wall rigid insulated chimney system had been installed. After the existing flue liner and chimney system had been removed cast in situ pumped cement was used to form a gather to locate the bottom of the FuranFlex25 liner.

A 300mm RWV liner was winched up through the existing chimney. After the curing had been completed the liner was trimmed top and bottom.

Specialist Chimney Services were asked to carry out another four flue liners at the property using the same liner.

Attachments

Posted in Case and tagged , .
Country: UK
Material: FF RWV
Published by Nicolas Shaw working at Kompozit'all UK in UK